• Docs >
  • Audio Data Augmentation
Shortcuts

Audio Data Augmentation

Author: Moto Hira

torchaudio provides a variety of ways to augment audio data.

In this tutorial, we look into a way to apply effects, filters, RIR (room impulse response) and codecs.

At the end, we synthesize noisy speech over phone from clean speech.

import torch
import torchaudio
import torchaudio.functional as F

print(torch.__version__)
print(torchaudio.__version__)
2.0.0
2.0.1

Preparation

First, we import the modules and download the audio assets we use in this tutorial.

import math

from IPython.display import Audio
import matplotlib.pyplot as plt

from torchaudio.utils import download_asset

SAMPLE_WAV = download_asset("tutorial-assets/steam-train-whistle-daniel_simon.wav")
SAMPLE_RIR = download_asset("tutorial-assets/Lab41-SRI-VOiCES-rm1-impulse-mc01-stu-clo-8000hz.wav")
SAMPLE_SPEECH = download_asset("tutorial-assets/Lab41-SRI-VOiCES-src-sp0307-ch127535-sg0042-8000hz.wav")
SAMPLE_NOISE = download_asset("tutorial-assets/Lab41-SRI-VOiCES-rm1-babb-mc01-stu-clo-8000hz.wav")
  0%|          | 0.00/427k [00:00<?, ?B/s]
100%|##########| 427k/427k [00:00<00:00, 111MB/s]

  0%|          | 0.00/31.3k [00:00<?, ?B/s]
100%|##########| 31.3k/31.3k [00:00<00:00, 21.7MB/s]

  0%|          | 0.00/78.2k [00:00<?, ?B/s]
100%|##########| 78.2k/78.2k [00:00<00:00, 47.0MB/s]

Applying effects and filtering

torchaudio.sox_effects() allows for directly applying filters similar to those available in sox to Tensor objects and file object audio sources.

There are two functions for this:

Both functions accept effect definitions in the form List[List[str]]. This is mostly consistent with how sox command works, but one caveat is that sox adds some effects automatically, whereas torchaudio’s implementation does not.

For the list of available effects, please refer to the sox documentation.

Tip If you need to load and resample your audio data on the fly, then you can use torchaudio.sox_effects.apply_effects_file() with effect "rate".

Note torchaudio.sox_effects.apply_effects_file() accepts a file-like object or path-like object. Similar to torchaudio.load(), when the audio format cannot be inferred from either the file extension or header, you can provide argument format to specify the format of the audio source.

Note This process is not differentiable.

# Load the data
waveform1, sample_rate1 = torchaudio.load(SAMPLE_WAV)

# Define effects
effects = [
    ["lowpass", "-1", "300"],  # apply single-pole lowpass filter
    ["speed", "0.8"],  # reduce the speed
    # This only changes sample rate, so it is necessary to
    # add `rate` effect with original sample rate after this.
    ["rate", f"{sample_rate1}"],
    ["reverb", "-w"],  # Reverbration gives some dramatic feeling
]

# Apply effects
waveform2, sample_rate2 = torchaudio.sox_effects.apply_effects_tensor(waveform1, sample_rate1, effects)

print(waveform1.shape, sample_rate1)
print(waveform2.shape, sample_rate2)
torch.Size([2, 109368]) 44100
torch.Size([2, 136710]) 44100

Note that the number of frames and number of channels are different from those of the original after the effects are applied. Let’s listen to the audio.

def plot_waveform(waveform, sample_rate, title="Waveform", xlim=None):
    waveform = waveform.numpy()

    num_channels, num_frames = waveform.shape
    time_axis = torch.arange(0, num_frames) / sample_rate

    figure, axes = plt.subplots(num_channels, 1)
    if num_channels == 1:
        axes = [axes]
    for c in range(num_channels):
        axes[c].plot(time_axis, waveform[c], linewidth=1)
        axes[c].grid(True)
        if num_channels > 1:
            axes[c].set_ylabel(f"Channel {c+1}")
        if xlim:
            axes[c].set_xlim(xlim)
    figure.suptitle(title)
    plt.show(block=False)
def plot_specgram(waveform, sample_rate, title="Spectrogram", xlim=None):
    waveform = waveform.numpy()

    num_channels, _ = waveform.shape

    figure, axes = plt.subplots(num_channels, 1)
    if num_channels == 1:
        axes = [axes]
    for c in range(num_channels):
        axes[c].specgram(waveform[c], Fs=sample_rate)
        if num_channels > 1:
            axes[c].set_ylabel(f"Channel {c+1}")
        if xlim:
            axes[c].set_xlim(xlim)
    figure.suptitle(title)
    plt.show(block=False)

Original:

plot_waveform(waveform1, sample_rate1, title="Original", xlim=(-0.1, 3.2))
plot_specgram(waveform1, sample_rate1, title="Original", xlim=(0, 3.04))
Audio(waveform1, rate=sample_rate1)
  • Original
  • Original


Effects applied:

plot_waveform(waveform2, sample_rate2, title="Effects Applied", xlim=(-0.1, 3.2))
plot_specgram(waveform2, sample_rate2, title="Effects Applied", xlim=(0, 3.04))
Audio(waveform2, rate=sample_rate2)
  • Effects Applied
  • Effects Applied


Doesn’t it sound more dramatic?

Simulating room reverberation

Convolution reverb is a technique that’s used to make clean audio sound as though it has been produced in a different environment.

Using Room Impulse Response (RIR), for instance, we can make clean speech sound as though it has been uttered in a conference room.

For this process, we need RIR data. The following data are from the VOiCES dataset, but you can record your own — just turn on your microphone and clap your hands.

rir_raw, sample_rate = torchaudio.load(SAMPLE_RIR)
plot_waveform(rir_raw, sample_rate, title="Room Impulse Response (raw)")
plot_specgram(rir_raw, sample_rate, title="Room Impulse Response (raw)")
Audio(rir_raw, rate=sample_rate)
  • Room Impulse Response (raw)
  • Room Impulse Response (raw)


First, we need to clean up the RIR. We extract the main impulse and normalize it by its power.

rir = rir_raw[:, int(sample_rate * 1.01) : int(sample_rate * 1.3)]
rir = rir / torch.norm(rir, p=2)

plot_waveform(rir, sample_rate, title="Room Impulse Response")
Room Impulse Response

Then, using torchaudio.functional.fftconvolve(), we convolve the speech signal with the RIR.

speech, _ = torchaudio.load(SAMPLE_SPEECH)
augmented = F.fftconvolve(speech, rir)

Original:

plot_waveform(speech, sample_rate, title="Original")
plot_specgram(speech, sample_rate, title="Original")
Audio(speech, rate=sample_rate)
  • Original
  • Original


RIR applied:

plot_waveform(augmented, sample_rate, title="RIR Applied")
plot_specgram(augmented, sample_rate, title="RIR Applied")
Audio(augmented, rate=sample_rate)
  • RIR Applied
  • RIR Applied


Adding background noise

To introduce background noise to audio data, we can add a noise Tensor to the Tensor representing the audio data according to some desired signal-to-noise ratio (SNR) [wikipedia], which determines the intensity of the audio data relative to that of the noise in the output.

$$ \mathrm{SNR} = \frac{P_{signal}}{P_{noise}} $$

$$ \mathrm{SNR_{dB}} = 10 \log _{{10}} \mathrm {SNR} $$

To add noise to audio data per SNRs, we use torchaudio.functional.add_noise().

speech, _ = torchaudio.load(SAMPLE_SPEECH)
noise, _ = torchaudio.load(SAMPLE_NOISE)
noise = noise[:, : speech.shape[1]]

snr_dbs = torch.tensor([20, 10, 3])
noisy_speeches = F.add_noise(speech, noise, snr_dbs)

Background noise:

plot_waveform(noise, sample_rate, title="Background noise")
plot_specgram(noise, sample_rate, title="Background noise")
Audio(noise, rate=sample_rate)
  • Background noise
  • Background noise


SNR 20 dB:

snr_db, noisy_speech = snr_dbs[0], noisy_speeches[0:1]
plot_waveform(noisy_speech, sample_rate, title=f"SNR: {snr_db} [dB]")
plot_specgram(noisy_speech, sample_rate, title=f"SNR: {snr_db} [dB]")
Audio(noisy_speech, rate=sample_rate)
  • SNR: 20 [dB]
  • SNR: 20 [dB]


SNR 10 dB:

snr_db, noisy_speech = snr_dbs[1], noisy_speeches[1:2]
plot_waveform(noisy_speech, sample_rate, title=f"SNR: {snr_db} [dB]")
plot_specgram(noisy_speech, sample_rate, title=f"SNR: {snr_db} [dB]")
Audio(noisy_speech, rate=sample_rate)
  • SNR: 10 [dB]
  • SNR: 10 [dB]


SNR 3 dB:

snr_db, noisy_speech = snr_dbs[2], noisy_speeches[2:3]
plot_waveform(noisy_speech, sample_rate, title=f"SNR: {snr_db} [dB]")
plot_specgram(noisy_speech, sample_rate, title=f"SNR: {snr_db} [dB]")
Audio(noisy_speech, rate=sample_rate)
  • SNR: 3 [dB]
  • SNR: 3 [dB]


Applying codec to Tensor object

torchaudio.functional.apply_codec() can apply codecs to a Tensor object.

Note This process is not differentiable.

waveform, sample_rate = torchaudio.load(SAMPLE_SPEECH)

configs = [
    {"format": "wav", "encoding": "ULAW", "bits_per_sample": 8},
    {"format": "gsm"},
    {"format": "vorbis", "compression": -1},
]
waveforms = []
for param in configs:
    augmented = F.apply_codec(waveform, sample_rate, **param)
    waveforms.append(augmented)
/usr/local/envs/python3.8/lib/python3.8/site-packages/torchaudio/backend/sox_io_backend.py:416: UserWarning: File-like object support in sox_io backend is deprecated, and will be removed in v2.1. See https://github.com/pytorch/audio/issues/2950 for the detail.Please migrate to the new dispatcher, or use soundfile backend.
  warnings.warn(_deprecation_message)
/usr/local/envs/python3.8/lib/python3.8/site-packages/torchaudio/backend/sox_io_backend.py:235: UserWarning: File-like object support in sox_io backend is deprecated, and will be removed in v2.1. See https://github.com/pytorch/audio/issues/2950 for the detail.Please migrate to the new dispatcher, or use soundfile backend.
  warnings.warn(_deprecation_message)

Original:

plot_waveform(waveform, sample_rate, title="Original")
plot_specgram(waveform, sample_rate, title="Original")
Audio(waveform, rate=sample_rate)
  • Original
  • Original


8 bit mu-law:

plot_waveform(waveforms[0], sample_rate, title="8 bit mu-law")
plot_specgram(waveforms[0], sample_rate, title="8 bit mu-law")
Audio(waveforms[0], rate=sample_rate)
  • 8 bit mu-law
  • 8 bit mu-law


GSM-FR:

plot_waveform(waveforms[1], sample_rate, title="GSM-FR")
plot_specgram(waveforms[1], sample_rate, title="GSM-FR")
Audio(waveforms[1], rate=sample_rate)
  • GSM-FR
  • GSM-FR


Vorbis:

plot_waveform(waveforms[2], sample_rate, title="Vorbis")
plot_specgram(waveforms[2], sample_rate, title="Vorbis")
Audio(waveforms[2], rate=sample_rate)
  • Vorbis
  • Vorbis


Simulating a phone recoding

Combining the previous techniques, we can simulate audio that sounds like a person talking over a phone in a echoey room with people talking in the background.

sample_rate = 16000
original_speech, sample_rate = torchaudio.load(SAMPLE_SPEECH)

plot_specgram(original_speech, sample_rate, title="Original")

# Apply RIR
rir_applied = F.fftconvolve(speech, rir)

plot_specgram(rir_applied, sample_rate, title="RIR Applied")

# Add background noise
# Because the noise is recorded in the actual environment, we consider that
# the noise contains the acoustic feature of the environment. Therefore, we add
# the noise after RIR application.
noise, _ = torchaudio.load(SAMPLE_NOISE)
noise = noise[:, : rir_applied.shape[1]]

snr_db = torch.tensor([8])
bg_added = F.add_noise(rir_applied, noise, snr_db)

plot_specgram(bg_added, sample_rate, title="BG noise added")

# Apply filtering and change sample rate
filtered, sample_rate2 = torchaudio.sox_effects.apply_effects_tensor(
    bg_added,
    sample_rate,
    effects=[
        ["lowpass", "4000"],
        [
            "compand",
            "0.02,0.05",
            "-60,-60,-30,-10,-20,-8,-5,-8,-2,-8",
            "-8",
            "-7",
            "0.05",
        ],
        ["rate", "8000"],
    ],
)

plot_specgram(filtered, sample_rate2, title="Filtered")

# Apply telephony codec
codec_applied = F.apply_codec(filtered, sample_rate2, format="gsm")

plot_specgram(codec_applied, sample_rate2, title="GSM Codec Applied")
  • Original
  • RIR Applied
  • BG noise added
  • Filtered
  • GSM Codec Applied
/usr/local/envs/python3.8/lib/python3.8/site-packages/torchaudio/backend/sox_io_backend.py:416: UserWarning: File-like object support in sox_io backend is deprecated, and will be removed in v2.1. See https://github.com/pytorch/audio/issues/2950 for the detail.Please migrate to the new dispatcher, or use soundfile backend.
  warnings.warn(_deprecation_message)
/usr/local/envs/python3.8/lib/python3.8/site-packages/torchaudio/backend/sox_io_backend.py:235: UserWarning: File-like object support in sox_io backend is deprecated, and will be removed in v2.1. See https://github.com/pytorch/audio/issues/2950 for the detail.Please migrate to the new dispatcher, or use soundfile backend.
  warnings.warn(_deprecation_message)

Original speech:



RIR applied:

Audio(rir_applied, rate=sample_rate)


Background noise added:

Audio(bg_added, rate=sample_rate)


Filtered:

Audio(filtered, rate=sample_rate2)


Codec applied:



Total running time of the script: ( 0 minutes 16.050 seconds)

Gallery generated by Sphinx-Gallery

Docs

Access comprehensive developer documentation for PyTorch

View Docs

Tutorials

Get in-depth tutorials for beginners and advanced developers

View Tutorials

Resources

Find development resources and get your questions answered

View Resources