Shortcuts

Upsample

class torch.nn.Upsample(size=None, scale_factor=None, mode='nearest', align_corners=None, recompute_scale_factor=None)[source]

Upsamples a given multi-channel 1D (temporal), 2D (spatial) or 3D (volumetric) data.

The input data is assumed to be of the form minibatch x channels x [optional depth] x [optional height] x width. Hence, for spatial inputs, we expect a 4D Tensor and for volumetric inputs, we expect a 5D Tensor.

The algorithms available for upsampling are nearest neighbor and linear, bilinear, bicubic and trilinear for 3D, 4D and 5D input Tensor, respectively.

One can either give a scale_factor or the target output size to calculate the output size. (You cannot give both, as it is ambiguous)

Parameters
  • size (int or Tuple[int] or Tuple[int, int] or Tuple[int, int, int], optional) – output spatial sizes

  • scale_factor (float or Tuple[float] or Tuple[float, float] or Tuple[float, float, float], optional) – multiplier for spatial size. Has to match input size if it is a tuple.

  • mode (str, optional) – the upsampling algorithm: one of 'nearest', 'linear', 'bilinear', 'bicubic' and 'trilinear'. Default: 'nearest'

  • align_corners (bool, optional) – if True, the corner pixels of the input and output tensors are aligned, and thus preserving the values at those pixels. This only has effect when mode is 'linear', 'bilinear', 'bicubic', or 'trilinear'. Default: False

  • recompute_scale_factor (bool, optional) – recompute the scale_factor for use in the interpolation calculation. If recompute_scale_factor is True, then scale_factor must be passed in and scale_factor is used to compute the output size. The computed output size will be used to infer new scales for the interpolation. Note that when scale_factor is floating-point, it may differ from the recomputed scale_factor due to rounding and precision issues. If recompute_scale_factor is False, then size or scale_factor will be used directly for interpolation.

Shape:
  • Input: (N,C,Win)(N, C, W_{in}), (N,C,Hin,Win)(N, C, H_{in}, W_{in}) or (N,C,Din,Hin,Win)(N, C, D_{in}, H_{in}, W_{in})

  • Output: (N,C,Wout)(N, C, W_{out}), (N,C,Hout,Wout)(N, C, H_{out}, W_{out}) or (N,C,Dout,Hout,Wout)(N, C, D_{out}, H_{out}, W_{out}), where

Dout=Din×scale_factorD_{out} = \left\lfloor D_{in} \times \text{scale\_factor} \right\rfloor
Hout=Hin×scale_factorH_{out} = \left\lfloor H_{in} \times \text{scale\_factor} \right\rfloor
Wout=Win×scale_factorW_{out} = \left\lfloor W_{in} \times \text{scale\_factor} \right\rfloor

Warning

With align_corners = True, the linearly interpolating modes (linear, bilinear, bicubic, and trilinear) don’t proportionally align the output and input pixels, and thus the output values can depend on the input size. This was the default behavior for these modes up to version 0.3.1. Since then, the default behavior is align_corners = False. See below for concrete examples on how this affects the outputs.

Note

If you want downsampling/general resizing, you should use interpolate().

Examples:

>>> input = torch.arange(1, 5, dtype=torch.float32).view(1, 1, 2, 2)
>>> input
tensor([[[[1., 2.],
          [3., 4.]]]])

>>> m = nn.Upsample(scale_factor=2, mode='nearest')
>>> m(input)
tensor([[[[1., 1., 2., 2.],
          [1., 1., 2., 2.],
          [3., 3., 4., 4.],
          [3., 3., 4., 4.]]]])

>>> m = nn.Upsample(scale_factor=2, mode='bilinear')  # align_corners=False
>>> m(input)
tensor([[[[1.0000, 1.2500, 1.7500, 2.0000],
          [1.5000, 1.7500, 2.2500, 2.5000],
          [2.5000, 2.7500, 3.2500, 3.5000],
          [3.0000, 3.2500, 3.7500, 4.0000]]]])

>>> m = nn.Upsample(scale_factor=2, mode='bilinear', align_corners=True)
>>> m(input)
tensor([[[[1.0000, 1.3333, 1.6667, 2.0000],
          [1.6667, 2.0000, 2.3333, 2.6667],
          [2.3333, 2.6667, 3.0000, 3.3333],
          [3.0000, 3.3333, 3.6667, 4.0000]]]])

>>> # Try scaling the same data in a larger tensor
>>> input_3x3 = torch.zeros(3, 3).view(1, 1, 3, 3)
>>> input_3x3[:, :, :2, :2].copy_(input)
tensor([[[[1., 2.],
          [3., 4.]]]])
>>> input_3x3
tensor([[[[1., 2., 0.],
          [3., 4., 0.],
          [0., 0., 0.]]]])

>>> m = nn.Upsample(scale_factor=2, mode='bilinear')  # align_corners=False
>>> # Notice that values in top left corner are the same with the small input (except at boundary)
>>> m(input_3x3)
tensor([[[[1.0000, 1.2500, 1.7500, 1.5000, 0.5000, 0.0000],
          [1.5000, 1.7500, 2.2500, 1.8750, 0.6250, 0.0000],
          [2.5000, 2.7500, 3.2500, 2.6250, 0.8750, 0.0000],
          [2.2500, 2.4375, 2.8125, 2.2500, 0.7500, 0.0000],
          [0.7500, 0.8125, 0.9375, 0.7500, 0.2500, 0.0000],
          [0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000]]]])

>>> m = nn.Upsample(scale_factor=2, mode='bilinear', align_corners=True)
>>> # Notice that values in top left corner are now changed
>>> m(input_3x3)
tensor([[[[1.0000, 1.4000, 1.8000, 1.6000, 0.8000, 0.0000],
          [1.8000, 2.2000, 2.6000, 2.2400, 1.1200, 0.0000],
          [2.6000, 3.0000, 3.4000, 2.8800, 1.4400, 0.0000],
          [2.4000, 2.7200, 3.0400, 2.5600, 1.2800, 0.0000],
          [1.2000, 1.3600, 1.5200, 1.2800, 0.6400, 0.0000],
          [0.0000, 0.0000, 0.0000, 0.0000, 0.0000, 0.0000]]]])

Docs

Access comprehensive developer documentation for PyTorch

View Docs

Tutorials

Get in-depth tutorials for beginners and advanced developers

View Tutorials

Resources

Find development resources and get your questions answered

View Resources