Pipeline parallelism was original introduced in the Gpipe paper and is an efficient technique to train large models on multiple GPUs.
Pipeline Parallelism is experimental and subject to change.
Model Parallelism using multiple GPUs¶
Typically for large models which don’t fit on a single GPU, model parallelism is employed where certain parts of the model are placed on different GPUs. Although, if this is done naively for sequential models, the training process suffers from GPU under utilization since only one GPU is active at one time as shown in the figure below:
To alleviate this problem, pipeline parallelism splits the input minibatch into multiple microbatches and pipelines the execution of these microbatches across multiple GPUs. This is outlined in the figure below:
Pipe APIs in PyTorch¶
Pipe(module, chunks=1, checkpoint='except_last', deferred_batch_norm=False)¶
Wraps an arbitrary
nn.Sequentialmodule to train on using synchronous pipeline parallelism. If the module requires lots of memory and doesn’t fit on a single GPU, pipeline parallelism is a useful technique to employ for training.
The implementation is based on the torchgpipe paper.
Pipe combines pipeline parallelism with checkpointing to reduce peak memory required to train while minimizing device under-utilization.
You should place all the modules on the appropriate devices and wrap them into an
nn.Sequentialmodule defining the desired order of execution. If a module does not contain any parameters/buffers, it is assumed this module should be executed on CPU and appropriate input tensors to the module are moved to CPU before execution. This behavior can be overridden by the
WithDevicewrapper which can be used to explicitly specify which device a module should run on.
nn.Sequential) – sequential module to be parallelized using pipelining. Each module in the sequence has to have all of its parameters on a single device. Each module in the sequence has to either be an nn.Module or
nn.Sequential(to combine multiple sequential modules on a single device)
chunks (int) – number of micro-batches (default:
checkpoint (str) – when to enable checkpointing, one of
'never'disables checkpointing completely,
'except_last'enables checkpointing for all micro-batches except the last one and
'always'enables checkpointing for all micro-batches.
deferred_batch_norm (bool) – whether to use deferred
BatchNormmoving statistics (default:
False). If set to
True, we track statistics across multiple micro-batches to update the running statistics per mini-batch.
Pipeline of two FC layers across GPUs 0 and 1.
>>> # Need to initialize RPC framework first. >>> os.environ['MASTER_ADDR'] = 'localhost' >>> os.environ['MASTER_PORT'] = '29500' >>> torch.distributed.rpc.init_rpc('worker', rank=0, world_size=1) >>> >>> # Build pipe. >>> fc1 = nn.Linear(16, 8).cuda(0) >>> fc2 = nn.Linear(8, 4).cuda(1) >>> model = nn.Sequential(fc1, fc2) >>> model = Pipe(model, chunks=8) >>> input = torch.rand(16, 16).cuda(0) >>> output_rref = model(input)
Pipeonly supports intra-node pipelining currently, but will be expanded to support inter-node pipelining in the future. The forward function returns an
RRefto allow for inter-node pipelining in the future, where the output might be on a remote host. For intra-node pipelinining you can use
local_value()to retrieve the output locally.
Pipeis experimental and subject to change.
Processes a single input mini-batch through the pipe and returns an
RRefpointing to the output.
Pipeis a fairly transparent module wrapper. It doesn’t modify the input and output signature of the underlying module. But there’s type restriction. Input and output have to contain at least one tensor. This restriction is applied at partition boundaries too.
The sequence of inputs are fed into the first stage of the pipeline as
*inputs. As a result the positional args for this function should match the positional args for the first stage of the pipeline. The same condition applies for output of one stage of the pipeline which is the input for the next stage.
The input tensor is split into multiple micro-batches based on the
chunksparameter used to initialize
Pipe. The batch size is assumed to be the first dimension of the tensor and if the batch size is less than
chunks, the number of micro-batches is equal to the batch size.
Only tensors are split into multiple micro-batches, non-Tensor inputs are just replicated as-is in each micro-batch. For non-Tensor outputs in the last stage of the pipeline, they are aggregated as a
Listand returned the user. For example, if you have 2 micro-batches returning the integer 5, the user would receive the consolidated output of [5, 5]
All the input tensors need to be on the same device as the first partition of the pipeline.
If a tensor is wrapped with the
NoChunkwrapper, the tensor is not split across micro-batches and is replicated as-is similar to non-tensors.
Certain models like ResNeXt are not completely sequential and have skip connections between layers. Naively implementing as part of pipeling parallelism would imply that we need to copy outputs for certain layers through multiple GPUs till we eventually reach the GPU where the layer for the skip connection resides. To avoid this copy overhead, we provide APIs below to stash and pop Tensors in different layers of the model.
Each skip tensor is managed by its name. Before manipulating skip tensors, a skippable module must statically declare the names for skip tensors by stash and/or pop parameters. Skip tensors with pre-declared name can be stashed by
yield stash(name, tensor)or popped by
tensor = yield pop(name).
Here is an example with three layers. A skip tensor named “1to3” is stashed and popped at the first and last layer, respectively:
@skippable(stash=['1to3']) class Layer1(nn.Module): def forward(self, input): yield stash('1to3', input) return f1(input) class Layer2(nn.Module): def forward(self, input): return f2(input) @skippable(pop=['1to3']) class Layer3(nn.Module): def forward(self, input): skip_1to3 = yield pop('1to3') return f3(input) + skip_1to3 model = nn.Sequential(Layer1(), Layer2(), Layer3())
One skippable module can stash or pop multiple skip tensors:
@skippable(stash=['alice', 'bob'], pop=['carol']) class StashStashPop(nn.Module): def forward(self, input): yield stash('alice', f_alice(input)) yield stash('bob', f_bob(input)) carol = yield pop('carol') return input + carol
Every skip tensor must be associated with exactly one pair of stash and pop.
Pipechecks this restriction automatically when wrapping a module. You can also check the restriction by
The command to stash a skip tensor.
def forward(self, input): yield stash('name', input) return f(input)
The command to pop a skip tensor.
def forward(self, input): skip = yield pop('name') return f(input) + skip
name (str) – name of skip tensor
the skip tensor previously stashed by another layer under the same name
Verifies if the underlying skippable modules satisfy integrity.
Every skip tensor must have only one pair of stash and pop. If there are one or more unmatched pairs, it will raise
TypeErrorwith the detailed messages.
Here are a few failure cases.
verify_skippables()will report failure for these cases:
# Layer1 stashes "1to3". # Layer3 pops "1to3". nn.Sequential(Layer1(), Layer2()) # └──── ? nn.Sequential(Layer2(), Layer3()) # ? ────┘ nn.Sequential(Layer1(), Layer2(), Layer3(), Layer3()) # └───────────────────┘ ^^^^^^ nn.Sequential(Layer1(), Layer1(), Layer2(), Layer3()) # ^^^^^^ └───────────────────┘
To use the same name for multiple skip tensors, they must be isolated by different namespaces. See
TypeError – one or more pairs of stash and pop are not matched.
The following tutorials give a good overview of how to use the
Pipe API to train your models with the
rest of the components that PyTorch provides: