torch.onnx
============
.. contents:: :local:
.. automodule:: torch.onnx
Example: End-to-end AlexNet from PyTorch to ONNX
------------------------------------------------
Here is a simple script which exports a pretrained AlexNet as defined in
torchvision into ONNX. It runs a single round of inference and then
saves the resulting traced model to ``alexnet.onnx``::
import torch
import torchvision
dummy_input = torch.randn(10, 3, 224, 224, device='cuda')
model = torchvision.models.alexnet(pretrained=True).cuda()
# Providing input and output names sets the display names for values
# within the model's graph. Setting these does not change the semantics
# of the graph; it is only for readability.
#
# The inputs to the network consist of the flat list of inputs (i.e.
# the values you would pass to the forward() method) followed by the
# flat list of parameters. You can partially specify names, i.e. provide
# a list here shorter than the number of inputs to the model, and we will
# only set that subset of names, starting from the beginning.
input_names = [ "actual_input_1" ] + [ "learned_%d" % i for i in range(16) ]
output_names = [ "output1" ]
torch.onnx.export(model, dummy_input, "alexnet.onnx", verbose=True, input_names=input_names, output_names=output_names)
The resulting ``alexnet.onnx`` is a binary protobuf file which contains both
the network structure and parameters of the model you exported
(in this case, AlexNet). The keyword argument ``verbose=True`` causes the
exporter to print out a human-readable representation of the network::
# These are the inputs and parameters to the network, which have taken on
# the names we specified earlier.
graph(%actual_input_1 : Float(10, 3, 224, 224)
%learned_0 : Float(64, 3, 11, 11)
%learned_1 : Float(64)
%learned_2 : Float(192, 64, 5, 5)
%learned_3 : Float(192)
# ---- omitted for brevity ----
%learned_14 : Float(1000, 4096)
%learned_15 : Float(1000)) {
# Every statement consists of some output tensors (and their types),
# the operator to be run (with its attributes, e.g., kernels, strides,
# etc.), its input tensors (%actual_input_1, %learned_0, %learned_1)
%17 : Float(10, 64, 55, 55) = onnx::Conv[dilations=[1, 1], group=1, kernel_shape=[11, 11], pads=[2, 2, 2, 2], strides=[4, 4]](%actual_input_1, %learned_0, %learned_1), scope: AlexNet/Sequential[features]/Conv2d[0]
%18 : Float(10, 64, 55, 55) = onnx::Relu(%17), scope: AlexNet/Sequential[features]/ReLU[1]
%19 : Float(10, 64, 27, 27) = onnx::MaxPool[kernel_shape=[3, 3], pads=[0, 0, 0, 0], strides=[2, 2]](%18), scope: AlexNet/Sequential[features]/MaxPool2d[2]
# ---- omitted for brevity ----
%29 : Float(10, 256, 6, 6) = onnx::MaxPool[kernel_shape=[3, 3], pads=[0, 0, 0, 0], strides=[2, 2]](%28), scope: AlexNet/Sequential[features]/MaxPool2d[12]
# Dynamic means that the shape is not known. This may be because of a
# limitation of our implementation (which we would like to fix in a
# future release) or shapes which are truly dynamic.
%30 : Dynamic = onnx::Shape(%29), scope: AlexNet
%31 : Dynamic = onnx::Slice[axes=[0], ends=[1], starts=[0]](%30), scope: AlexNet
%32 : Long() = onnx::Squeeze[axes=[0]](%31), scope: AlexNet
%33 : Long() = onnx::Constant[value={9216}](), scope: AlexNet
# ---- omitted for brevity ----
%output1 : Float(10, 1000) = onnx::Gemm[alpha=1, beta=1, broadcast=1, transB=1](%45, %learned_14, %learned_15), scope: AlexNet/Sequential[classifier]/Linear[6]
return (%output1);
}
You can also verify the protobuf using the `ONNX <https://github.com/onnx/onnx/>`_ library.
You can install ``ONNX`` with conda::
conda install -c conda-forge onnx
Then, you can run::
import onnx
# Load the ONNX model
model = onnx.load("alexnet.onnx")
# Check that the IR is well formed
onnx.checker.check_model(model)
# Print a human readable representation of the graph
onnx.helper.printable_graph(model.graph)
To run the exported script with `caffe2 <https://caffe2.ai/>`_, you will need to install `caffe2`: If you don't have one already, Please `follow the install instructions <https://caffe2.ai/docs/getting-started.html>`_.
Once these are installed, you can use the backend for Caffe2::
# ...continuing from above
import caffe2.python.onnx.backend as backend
import numpy as np
rep = backend.prepare(model, device="CUDA:0") # or "CPU"
# For the Caffe2 backend:
# rep.predict_net is the Caffe2 protobuf for the network
# rep.workspace is the Caffe2 workspace for the network
# (see the class caffe2.python.onnx.backend.Workspace)
outputs = rep.run(np.random.randn(10, 3, 224, 224).astype(np.float32))
# To run networks with more than one input, pass a tuple
# rather than a single numpy ndarray.
print(outputs[0])
You can also run the exported model with `ONNX Runtime <https://github.com/microsoft/onnxruntime>`_,
you will need to install `ONNX Runtime`: please `follow these instructions <https://github.com/microsoft/onnxruntime#installation>`_.
Once these are installed, you can use the backend for ONNX Runtime::
# ...continuing from above
import onnxruntime as ort
ort_session = ort.InferenceSession('alexnet.onnx')
outputs = ort_session.run(None, {'actual_input_1': np.random.randn(10, 3, 224, 224).astype(np.float32)})
print(outputs[0])
Here is another `tutorial of exporting the SuperResolution model to ONNX. <https://pytorch.org/tutorials/advanced/super_resolution_with_onnxruntime.html>`_.
In the future, there will be backends for other frameworks as well.
Tracing vs Scripting
--------------------
The ONNX exporter can be both *trace-based* and *script-based* exporter.
* *trace-based* means that it operates by executing your model once, and exporting the operators which
were actually run during this run. This means that if your model is
dynamic, e.g., changes behavior depending on input data, the export
won't be accurate. Similarly, a trace is likely to be valid only
for a specific input size (which is one reason why we require explicit inputs
on tracing.) We recommend examining the model trace and making sure
the traced operators look reasonable. If your model contains control flows like
for loops and if conditions, *trace-based* exporter will unroll the loops and if conditions,
exporting a static graph that is exactly the same as this run. If you want
to export your model with dynamic control flows, you will need to use the *script-based* exporter.
* *script-based* means that the model you are trying to export is a `ScriptModule <jit.html>`_.
`ScriptModule` is the core data structure in `TorchScript`, and `TorchScript` is a subset of Python language,
that creates serializable and optimizable models from PyTorch code.
We allow mixing tracing and scripting. You can compose tracing and scripting to suit the particular requirements
of a part of a model. Checkout this example: ::
import torch
# Trace-based only
class LoopModel(torch.nn.Module):
def forward(self, x, y):
for i in range(y):
x = x + i
return x
model = LoopModel()
dummy_input = torch.ones(2, 3, dtype=torch.long)
loop_count = torch.tensor(5, dtype=torch.long)
torch.onnx.export(model, (dummy_input, loop_count), 'loop.onnx', verbose=True)
With *trace-based* exporter, we get the result ONNX graph which unrolls the for loop: ::
graph(%0 : Long(2, 3),
%1 : Long()):
%2 : Tensor = onnx::Constant[value={1}]()
%3 : Tensor = onnx::Add(%0, %2)
%4 : Tensor = onnx::Constant[value={2}]()
%5 : Tensor = onnx::Add(%3, %4)
%6 : Tensor = onnx::Constant[value={3}]()
%7 : Tensor = onnx::Add(%5, %6)
%8 : Tensor = onnx::Constant[value={4}]()
%9 : Tensor = onnx::Add(%7, %8)
return (%9)
To utilize *script-based* exporter for capturing the dynamic loop,
we can write the loop in script, and call it from the regular nn.Module: ::
# Mixing tracing and scripting
@torch.jit.script
def loop(x, y):
for i in range(int(y)):
x = x + i
return x
class LoopModel2(torch.nn.Module):
def forward(self, x, y):
return loop(x, y)
model = LoopModel2()
dummy_input = torch.ones(2, 3, dtype=torch.long)
loop_count = torch.tensor(5, dtype=torch.long)
torch.onnx.export(model, (dummy_input, loop_count), 'loop.onnx', verbose=True,
input_names=['input_data', 'loop_range'])
Now the exported ONNX graph becomes: ::
graph(%input_data : Long(2, 3),
%loop_range : Long()):
%2 : Long() = onnx::Constant[value={1}](), scope: LoopModel2/loop
%3 : Tensor = onnx::Cast[to=9](%2)
%4 : Long(2, 3) = onnx::Loop(%loop_range, %3, %input_data), scope: LoopModel2/loop
block0(%i.1 : Long(), %cond : bool, %x.6 : Long(2, 3)):
%8 : Long(2, 3) = onnx::Add(%x.6, %i.1), scope: LoopModel2/loop
%9 : Tensor = onnx::Cast[to=9](%2)
-> (%9, %8)
return (%4)
The dynamic control flow is captured correctly. We can verify in backends with different loop range. ::
import caffe2.python.onnx.backend as backend
import numpy as np
import onnx
model = onnx.load('loop.onnx')
rep = backend.prepare(model)
outputs = rep.run((dummy_input.numpy(), np.array(9).astype(np.int64)))
print(outputs[0])
#[[37 37 37]
# [37 37 37]]
import onnxruntime as ort
ort_sess = ort.InferenceSession('loop.onnx')
outputs = ort_sess.run(None, {'input_data': dummy_input.numpy(),
'loop_range': np.array(9).astype(np.int64)})
print(outputs)
#[array([[37, 37, 37],
# [37, 37, 37]], dtype=int64)]
To avoid exporting a variable scalar tensor as a fixed value constant as part of the ONNX model, please
avoid use of ``torch.Tensor.item()``. Torch supports implicit cast of single-element tensors to numbers.
E.g.: ::
class LoopModel(torch.nn.Module):
def forward(self, x, y):
res = []
arr = x.split(2, 0)
for i in range(int(y)):
res += [arr[i].sum(0, False)]
return torch.stack(res)
model = torch.jit.script(LoopModel())
inputs = (torch.randn(16), torch.tensor(8))
out = model(*inputs)
torch.onnx.export(model, inputs, 'loop_and_list.onnx', opset_version=11, example_outputs=out)
Type Annotations
--------------------------------
TorchScript only supports a subset of Python types. You can find more details about type annotation
`here <https://pytorch.org/docs/stable/jit_language_reference.html#id8>`_.
Due to optimization purposes, TorchScript only supports variables with single static types for script functions.
By default, each variable is assumed to be Tensor. If an argument to a ScriptModule function is not Tensor,
its type should be specified using MyPy-style annotations.
::
import torch
class Module(torch.nn.Module):
def forward(self, x, tup):
# type: (int, Tuple[Tensor, Tensor]) -> Tensor
t0, t1 = tup
return t0 + t1 + x
If the type annotation is not specified, TorchScript compiler fails with the runtime error below.
::
RuntimeError:
Tensor (inferred) cannot be used as a tuple:
File <filename>
def forward(self, x, tup):
t0, t1 = tup
~~~ <--- HERE
return t0 + t1 + x
Write PyTorch model in Torch way
--------------------------------
Avoid using numpy
~~~~~~~~~~~~~~~~~
PyTorch models can be written using numpy manipulations, but this is not proper when we convert to the ONNX model.
For the trace-based exporter, tracing treats the numpy values as the constant node,
therefore it calculates the wrong result if we change the input.
So the PyTorch model need implement using torch operators.
For example, do not use numpy operators on numpy tensors: ::
np.concatenate((x, y, z), axis=1)
do not convert to numpy types: ::
y = x.astype(np.int)
Always use torch tensors and torch operators: torch.concat, etc.
In addition, Dropout layer need defined in init function so that inferencing can handle it properly, i.e., ::
class MyModule(nn.Module):
def __init__(self):
self.dropout = nn.Dropout(0.5)
def forward(self, x):
x = self.dropout(x)
Avoid using .data field
~~~~~~~~~~~~~~~~~~~~~~~
The .data field is an old field that is kept for backward compatibility and should be avoided when writing models.
It's usage is dangerous and can make computations wrong, furthermore it can produce an incorrect trace graph and
therefore an incorrect ONNX graph. A safer alternative is to use .detach() instead.
Using dictionaries to handle Named Arguments as model inputs
------------------------------------------------------------
There are two ways to handle models which consist of named parameters or keyword arguments as inputs:
* The first method is to pass all the inputs in the same order as required by the model and pass None
values for the keyword arguments that do not require a value to be passed
* The second and more intuitive method is to represent the keyword arguments as key-value pairs where
the key represents the name of the argument in the model signature and the value represents the value
of the argument to be passed
For example, in the model: ::
class Model(torch.nn.Module):
def forward(self, x, y=None, z=None):
if y is not None:
return x + y
if z is not None:
return x + z
return x
m = Model()
x = torch.randn(2, 3)
z = torch.randn(2, 3)
There are two ways of exporting the model:
* Not using a dictionary for the keyword arguments and passing all the inputs in the same order
as required by the model ::
torch.onnx.export(model, (x, None, z), ‘test.onnx’)
* Using a dictionary to represent the keyword arguments. This dictionary is always passed in
addition to the non-keyword arguments and is always the last argument in the args tuple. ::
torch.onnx.export(model, (x, {'y': None, 'z': z}), ‘test.onnx’)
For cases in which there are no keyword arguments, models can be exported with either an
empty or no dictionary. For example, ::
torch.onnx.export(model, (x, {}), ‘test.onnx’)
or
torch.onnx.export(model, (x, ), ‘test.onnx’)
An exception to this rule are cases in which the last input is also of a dictionary type.
In these cases it is mandatory to have an empty dictionary as the last argument in the
args tuple. For example, ::
class Model(torch.nn.Module):
def forward(self, k, x):
...
return x
m = Model()
k = torch.randn(2, 3)
x = {torch.tensor(1.): torch.randn(2, 3)}
Without the presence of the empty dictionary, the export call assumes that the
‘x’ input is intended to represent the optional dictionary consisting of named arguments.
In order to prevent this from being an issue a constraint is placed to provide an empty
dictionary as the last input in the tuple args in such cases.
The new call would look like this. ::
torch.onnx.export(model, (k, x, {}), ‘test.onnx’)
Indexing
--------
Tensor indexing in PyTorch is very flexible and complicated.
There are two categories of indexing. Both are largely supported in exporting today.
If you are experiencing issues exporting indexing that belongs to the supported patterns below,
please double check that you are exporting with the latest opset (opset_version=12).
Getter
~~~~~~
This type of indexing occurs on the RHS. Export is supported for ONNX opset version >= 9. E.g.: ::
data = torch.randn(3, 4)
index = torch.tensor([1, 2])
# RHS indexing is supported in ONNX opset >= 11.
class RHSIndexing(torch.nn.Module):
def forward(self, data, index):
return data[index]
out = RHSIndexing()(data, index)
torch.onnx.export(RHSIndexing(), (data, index), 'indexing.onnx', opset_version=9)
# onnxruntime
import onnxruntime
sess = onnxruntime.InferenceSession('indexing.onnx')
out_ort = sess.run(None, {
sess.get_inputs()[0].name: data.numpy(),
sess.get_inputs()[1].name: index.numpy(),
})
assert torch.all(torch.eq(out, torch.tensor(out_ort)))
Below is the list of supported patterns for RHS indexing. ::
# Scalar indices
data[0, 1]
# Slice indices
data[:3]
# Tensor indices
data[torch.tensor([[1, 2], [2, 3]])]
data[torch.tensor([2, 3]), torch.tensor([1, 2])]
data[torch.tensor([[1, 2], [2, 3]]), torch.tensor([2, 3])]
data[torch.tensor([2, 3]), :, torch.tensor([1, 2])]
# Ellipsis followed by tensor indexing
# Not supported in scripting
# i.e. torch.jit.script(model) will fail if model contains this pattern.
# Export is supported under tracing
# i.e. torch.onnx.export(model)
data[..., torch.tensor([2, 1])]
# The combination of above
data[2, ..., torch.tensor([2, 1, 3]), 2:4, torch.tensor([[1], [2]])]
# Boolean mask (supported for ONNX opset version >= 11)
data[data != 1]
And below is the list of unsupported patterns for RHS indexing. ::
# Tensor indices that includes negative values.
data[torch.tensor([[1, 2], [2, -3]]), torch.tensor([-2, 3])]
Setter
~~~~~~
In code, this type of indexing occurs on the LHS.
Export is supported for ONNX opset version >= 11. E.g.: ::
data = torch.zeros(3, 4)
new_data = torch.arange(4).to(torch.float32)
# LHS indexing is supported in ONNX opset >= 11.
class LHSIndexing(torch.nn.Module):
def forward(self, data, new_data):
data[1] = new_data
return data
out = LHSIndexing()(data, new_data)
data = torch.zeros(3, 4)
new_data = torch.arange(4).to(torch.float32)
torch.onnx.export(LHSIndexing(), (data, new_data), 'inplace_assign.onnx', opset_version=11)
# onnxruntime
import onnxruntime
sess = onnxruntime.InferenceSession('inplace_assign.onnx')
out_ort = sess.run(None, {
sess.get_inputs()[0].name: torch.zeros(3, 4).numpy(),
sess.get_inputs()[1].name: new_data.numpy(),
})
assert torch.all(torch.eq(out, torch.tensor(out_ort)))
Below is the list of supported patterns for LHS indexing. ::
# Scalar indices
data[0, 1] = new_data
# Slice indices
data[:3] = new_data
# Tensor indices
# If more than one tensor are used as indices, only consecutive 1-d tensor indices are supported.
data[torch.tensor([[1, 2], [2, 3]])] = new_data
data[torch.tensor([2, 3]), torch.tensor([1, 2])] = new_data
# Ellipsis followed by tensor indexing
# Not supported to export in script modules
# i.e. torch.onnx.export(torch.jit.script(model)) will fail if model contains this pattern.
# Export is supported under tracing
# i.e. torch.onnx.export(model)
data[..., torch.tensor([2, 1])] = new_data
# The combination of above
data[2, ..., torch.tensor([2, 1, 3]), 2:4] += update
# Boolean mask
data[data != 1] = new_data
And below is the list of unsupported patterns for LHS indexing. ::
# Multiple tensor indices if any has rank >= 2
data[torch.tensor([[1, 2], [2, 3]]), torch.tensor([2, 3])] = new_data
# Multiple tensor indices that are not consecutive
data[torch.tensor([2, 3]), :, torch.tensor([1, 2])] = new_data
# Tensor indices that includes negative values.
data[torch.tensor([1, -2]), torch.tensor([-2, 3])] = new_data
If you are experiencing issues exporting indexing that belongs to the above supported patterns, please double check that
you are exporting with the latest opset (opset_version=12).
TorchVision support
-------------------
All TorchVision models, except for quantized versions, are exportable to ONNX.
More details can be found in `TorchVision <torchvision/models.html>`_.
Limitations
-----------
* Only tuples, lists and Variables are supported as JIT inputs/outputs. Dictionaries and strings are also accepted
but their usage is not recommended. Users need to verify their dict inputs carefully, and keep in mind that
dynamic lookups are not available.
* PyTorch and ONNX backends(Caffe2, ONNX Runtime, etc) often have implementations of operators with some
numeric differences. Depending on model structure, these differences
may be negligible, but they can also cause major divergences in behavior
(especially on untrained models.) We allow Caffe2 to call directly to Torch implementations of operators, to
help you smooth over these differences when precision is important,
and to also document these differences.
Supported operators
-------------------
The following operators are supported:
* BatchNorm
* ConstantPadNd
* Conv
* Dropout
* Embedding (no optional arguments supported)
* EmbeddingBag
* FeatureDropout (training mode not supported)
* Index
* MaxPool1d
* MaxPool2d
* MaxPool3d
* RNN
* abs
* absolute
* acos
* adaptive_avg_pool1d
* adaptive_avg_pool2d
* adaptive_avg_pool3d
* adaptive_max_pool1d
* adaptive_max_pool2d
* adaptive_max_pool3d
* add (nonzero alpha not supported)
* addmm
* and
* arange
* argmax
* argmin
* asin
* atan
* avg_pool1d
* avg_pool2d
* avg_pool2d
* avg_pool3d
* as_strided
* baddbmm
* bitshift
* cat
* ceil
* celu
* clamp
* clamp_max
* clamp_min
* concat
* copy
* cos
* cumsum
* det
* dim_arange
* div
* dropout
* einsum
* elu
* empty
* empty_like
* eq
* erf
* exp
* expand
* expand_as
* eye
* flatten
* floor
* floor_divide
* frobenius_norm
* full
* full_like
* gather
* ge
* gelu
* glu
* group_norm
* gt
* hardsigmoid
* hardswish
* hardtanh
* im2col
* index_copy
* index_fill
* index_put
* index_select
* instance_norm
* interpolate
* isnan
* KLDivLoss
* layer_norm
* le
* leaky_relu
* len
* log
* log1p
* log2
* log_sigmoid
* log_softmax
* logdet
* logsumexp
* lt
* masked_fill
* masked_scatter
* masked_select
* max
* mean
* min
* mm
* mul
* multinomial
* narrow
* ne
* neg
* new_empty
* new_full
* new_zeros
* nll_loss
* nonzero
* norm
* ones
* ones_like
* or
* permute
* pixel_shuffle
* pow
* prelu (single weight shared among input channels not supported)
* prod
* rand
* randn
* randn_like
* reciprocal
* reflection_pad
* relu
* repeat
* replication_pad
* reshape
* reshape_as
* round
* rrelu
* rsqrt
* rsub
* scalar_tensor
* scatter
* scatter_add
* select
* selu
* sigmoid
* sign
* sin
* size
* slice
* softmax
* softplus
* sort
* split
* sqrt
* squeeze
* stack
* std
* sub (nonzero alpha not supported)
* sum
* t
* tan
* tanh
* threshold (non-zero threshold/non-zero value not supported)
* to
* topk
* transpose
* true_divide
* type_as
* unbind
* unfold (experimental support with ATen-Caffe2 integration)
* unique
* unsqueeze
* upsample_nearest1d
* upsample_nearest2d
* upsample_nearest3d
* view
* weight_norm
* where
* zeros
* zeros_like
The operator set above is sufficient to export the following models:
* AlexNet
* DCGAN
* DenseNet
* Inception (warning: this model is highly sensitive to changes in operator
implementation)
* ResNet
* SuperResolution
* VGG
* `word_language_model <https://github.com/pytorch/examples/tree/master/word_language_model>`_
Adding support for operators
----------------------------
Adding export support for operators is an *advance usage*.
To achieve this, developers need to touch the source code of PyTorch.
Please follow the `instructions <https://github.com/pytorch/pytorch#from-source>`_
for installing PyTorch from source.
If the wanted operator is standardized in ONNX, it should be easy to add
support for exporting such operator (adding a symbolic function for the operator).
To confirm whether the operator is standardized or not, please check the
`ONNX operator list <https://github.com/onnx/onnx/blob/master/docs/Operators.md>`_.
ATen operators
~~~~~~~~~~~~~~
If the operator is an ATen operator, which means you can find the declaration
of the function in ``torch/csrc/autograd/generated/VariableType.h``
(available in generated code in PyTorch install dir), you should add the symbolic
function in ``torch/onnx/symbolic_opset<version>.py`` and follow the instructions listed as below:
* Define the symbolic function in ``torch/onnx/symbolic_opset<version>.py``, for example
`torch/onnx/symbolic_opset9.py <https://github.com/pytorch/pytorch/blob/master/torch/onnx/symbolic_opset9.py>`_.
Make sure the function has the same name as the ATen operator/function
defined in ``VariableType.h``.
* The first parameter is always the exported ONNX graph.
Parameter names must EXACTLY match the names in ``VariableType.h``,
because dispatch is done with keyword arguments.
* Parameter ordering does NOT necessarily match what is in ``VariableType.h``,
tensors (inputs) are always first, then non-tensor arguments.
* In the symbolic function, if the operator is already standardized in ONNX,
we only need to create a node to represent the ONNX operator in the graph.
* If the input argument is a tensor, but ONNX asks for a scalar, we have to
explicitly do the conversion. The helper function ``_scalar`` can convert a
scalar tensor into a python scalar, and ``_if_scalar_type_as`` can turn a
Python scalar into a PyTorch tensor.
Non-ATen operators
~~~~~~~~~~~~~~~~~~
If the operator is a non-ATen operator, the symbolic function has to be
added in the corresponding PyTorch Function class. Please read the following
instructions:
* Create a symbolic function named ``symbolic`` in the corresponding Function class.
* The first parameter is always the exported ONNX graph.
* Parameter names except the first must EXACTLY match the names in ``forward``.
* The output tuple size must match the outputs of ``forward``.
* In the symbolic function, if the operator is already standardized in ONNX,
we just need to create a node to represent the ONNX operator in the graph.
Symbolic functions should be implemented in Python. All of these functions interact
with Python methods which are implemented via C++-Python bindings,
but intuitively the interface they provide looks like this::
def operator/symbolic(g, *inputs):
"""
Modifies Graph (e.g., using "op"), adding the ONNX operations representing
this PyTorch function, and returning a Value or tuple of Values specifying the
ONNX outputs whose values correspond to the original PyTorch return values
of the autograd Function (or None if an output is not supported by ONNX).
Args:
g (Graph): graph to write the ONNX representation into
inputs (Value...): list of values representing the variables which contain
the inputs for this function
"""
class Value(object):
"""Represents an intermediate tensor value computed in ONNX."""
def type(self):
"""Returns the Type of the value."""
class Type(object):
def sizes(self):
"""Returns a tuple of ints representing the shape of a tensor this describes."""
class Graph(object):
def op(self, opname, *inputs, **attrs):
"""
Create an ONNX operator 'opname', taking 'args' as inputs
and attributes 'kwargs' and add it as a node to the current graph,
returning the value representing the single output of this
operator (see the `outputs` keyword argument for multi-return
nodes).
The set of operators and the inputs/attributes they take
is documented at https://github.com/onnx/onnx/blob/master/docs/Operators.md
Args:
opname (string): The ONNX operator name, e.g., `Abs` or `Add`.
args (Value...): The inputs to the operator; usually provided
as arguments to the `symbolic` definition.
kwargs: The attributes of the ONNX operator, with keys named
according to the following convention: `alpha_f` indicates
the `alpha` attribute with type `f`. The valid type specifiers are
`f` (float), `i` (int), `s` (string) or `t` (Tensor). An attribute
specified with type float accepts either a single float, or a
list of floats (e.g., you would say `dims_i` for a `dims` attribute
that takes a list of integers).
outputs (int, optional): The number of outputs this operator returns;
by default an operator is assumed to return a single output.
If `outputs` is greater than one, this functions returns a tuple
of output `Value`, representing each output of the ONNX operator
in positional.
"""
The ONNX graph C++ definition is in ``torch/csrc/jit/ir/ir.h``.
Here is an example of handling missing symbolic function for ``elu`` operator.
We try to export the model and see the error message as below::
UserWarning: ONNX export failed on elu because torch.onnx.symbolic_opset9.elu does not exist
RuntimeError: ONNX export failed: Couldn't export operator elu
The export fails because PyTorch does not support exporting ``elu`` operator.
We find ``virtual Tensor elu(const Tensor & input, Scalar alpha, bool inplace) const override;``
in ``VariableType.h``. This means ``elu`` is an ATen operator.
We check the `ONNX operator list <https://github.com/onnx/onnx/blob/master/docs/Operators.md>`_,
and confirm that ``Elu`` is standardized in ONNX.
We add the following lines to ``symbolic_opset9.py``::
def elu(g, input, alpha, inplace=False):
return g.op("Elu", input, alpha_f=_scalar(alpha))
Now PyTorch is able to export ``elu`` operator.
There are more examples in
`symbolic_opset9.py <https://github.com/pytorch/pytorch/blob/master/torch/onnx/symbolic_opset9.py>`_,
`symbolic_opset10.py <https://github.com/pytorch/pytorch/blob/master/torch/onnx/symbolic_opset10.py>`_.
The interface for specifying operator definitions is experimental;
adventurous users should note that the APIs will probably
change in a future interface.
Custom operators
~~~~~~~~~~~~~~~~
Following this tutorial `Extending TorchScript with Custom C++ Operators <https://pytorch.org/tutorials/advanced/torch_script_custom_ops.html>`_,
you can create and register your own custom ops implementation in PyTorch. Here's how to export such model to ONNX.::
# Create custom symbolic function
from torch.onnx.symbolic_helper import parse_args
@parse_args('v', 'v', 'f', 'i')
def symbolic_foo_forward(g, input1, input2, attr1, attr2):
return g.op("Foo", input1, input2, attr1_f=attr1, attr2_i=attr2)
# Register custom symbolic function
from torch.onnx import register_custom_op_symbolic
register_custom_op_symbolic('custom_ops::foo_forward', symbolic_foo_forward, 9)
class FooModel(torch.nn.Module):
def __init__(self, attr1, attr2):
super(FooModule, self).__init__()
self.attr1 = attr1
self.attr2 = attr2
def forward(self, input1, input2):
# Calling custom op
return torch.ops.custom_ops.foo_forward(input1, input2, self.attr1, self.attr2)
model = FooModel(attr1, attr2)
torch.onnx.export(model, (dummy_input1, dummy_input2), 'model.onnx', custom_opsets={"custom_domain": 2})
Depending on the custom operator, you can export it as one or a combination of existing ONNX ops.
You can also export it as a custom op in ONNX as well. In that case, you can specify the custom domain
and version (custom opset) using the ``custom_opsets`` dictionary at export. If not
explicitly specified, the custom opset version is set to 1 by default.
Using custom ONNX ops, you will need to extend the backend of your choice
with matching custom ops implementation, e.g. `Caffe2 custom ops <https://caffe2.ai/docs/custom-operators.html>`_,
`ONNX Runtime custom ops <https://github.com/microsoft/onnxruntime/blob/master/docs/AddingCustomOp.md>`_.
Operator Export Type
------------------------------------------------
Exporting models with unsupported ONNX operators can be achieved using the ``operator_export_type`` flag in export API.
This flag is useful when users try to export ATen and non-ATen operators that are not registered and supported in ONNX.
ONNX
~~~~
This mode is used to export all operators as regular ONNX operators. This is the default ``operator_export_type`` mode. ::
Example torch ir graph:
graph(%0 : Float(2, 3, 4, strides=[12, 4, 1])):
%3 : Float(2, 3, 4, strides=[12, 4, 1]) = aten:exp(%0)
%4 : Float(2, 3, 4, strides=[12, 4, 1]) = aten:div(%0, %3)
return (%4)
Is exported as:
graph(%0 : Float(2, 3, 4, strides=[12, 4, 1])):
%1 : Float(2, 3, 4, strides=[12, 4, 1]) = onnx:Exp(%0)
%2 : Float(2, 3, 4, strides=[12, 4, 1]) = onnx:Div(%0, %1)
return (%2)
ONNX_ATEN
~~~~~~~~~
This mode is used to export all operators as ATen ops, and avoid conversion to ONNX. ::
Example torch ir graph:
graph(%0 : Float(2, 3, 4, strides=[12, 4, 1])):
%3 : Float(2, 3, 4, strides=[12, 4, 1]) = aten::exp(%0)
%4 : Float(2, 3, 4, strides=[12, 4, 1]) = aten::div(%0, %3)
return (%4)
Is exported as:
graph(%0 : Float(2, 3, 4, strides=[12, 4, 1])):
%1 : Float(2, 3, 4, strides=[12, 4, 1]) = aten::ATen[operator="exp"](%0)
%2 : Float(2, 3, 4, strides=[12, 4, 1]) = aten::ATen[operator="div"](%0, %1)
return (%2)
ONNX_ATEN_FALLBACK
~~~~~~~~~~~~~~~~~~
To fallback on unsupported ATen operators in ONNX. Supported operators are exported to ONNX regularly.
In the following example, aten::triu is not supported in ONNX. Exporter falls back on this operator. ::
Example torch ir graph:
graph(%0 : Float):
%3 : int = prim::Constant[value=0]()
%4 : Float = aten::triu(%0, %3) # unsupported op
%5 : Float = aten::mul(%4, %0) # registered op
return (%5)
is exported as:
graph(%0 : Float):
%1 : Long() = onnx::Constant[value={0}]()
%2 : Float = aten::ATen[operator="triu"](%0, %1) # unsupported op
%3 : Float = onnx::Mul(%2, %0) # registered op
return (%3)
RAW
~~~
To export a raw ir. ::
Example torch ir graph:
graph(%x.1 : Float(1, strides=[1])):
%1 : Tensor = aten::exp(%x.1)
%2 : Tensor = aten::div(%x.1, %1)
%y.1 : Tensor[] = prim::ListConstruct(%2)
return (%y.1)
is exported as:
graph(%x.1 : Float(1, strides=[1])):
%1 : Tensor = aten::exp(%x.1)
%2 : Tensor = aten::div(%x.1, %1)
%y.1 : Tensor[] = prim::ListConstruct(%2)
return (%y.1)
ONNX_FALLTHROUGH
~~~~~~~~~~~~~~~~
This mode can be used to export any operator (ATen or non-ATen) that is not registered and supported in ONNX.
Exported falls through and exports the operator as is, as custom op. Exporting custom operators
enables users to register and implement the operator as part of their runtime backend. ::
Example torch ir graph:
graph(%0 : Float(2, 3, 4, strides=[12, 4, 1]),
%1 : Float(2, 3, 4, strides=[12, 4, 1])):
%6 : Float(2, 3, 4, strides=[12, 4, 1]) = foo_namespace::bar(%0, %1) # custom op
%7 : Float(2, 3, 4, strides=[12, 4, 1]) = aten::div(%6, %0) # registered op
return (%7))
is exported as:
graph(%0 : Float(2, 3, 4, strides=[12, 4, 1]),
%1 : Float(2, 3, 4, strides=[12, 4, 1])):
%2 : Float(2, 3, 4, strides=[12, 4, 1]) = foo_namespace::bar(%0, %1) # custom op
%3 : Float(2, 3, 4, strides=[12, 4, 1]) = onnx::Div(%2, %0) # registered op
return (%3
Frequently Asked Questions
--------------------------
Q: I have exported my lstm model, but its input size seems to be fixed?
The tracer records the example inputs shape in the graph. In case the model should accept
inputs of dynamic shape, you can utilize the parameter `dynamic_axes` in export api. ::
layer_count = 4
model = nn.LSTM(10, 20, num_layers=layer_count, bidirectional=True)
model.eval()
with torch.no_grad():
input = torch.randn(5, 3, 10)
h0 = torch.randn(layer_count * 2, 3, 20)
c0 = torch.randn(layer_count * 2, 3, 20)
output, (hn, cn) = model(input, (h0, c0))
# default export
torch.onnx.export(model, (input, (h0, c0)), 'lstm.onnx')
onnx_model = onnx.load('lstm.onnx')
# input shape [5, 3, 10]
print(onnx_model.graph.input[0])
# export with `dynamic_axes`
torch.onnx.export(model, (input, (h0, c0)), 'lstm.onnx',
input_names=['input', 'h0', 'c0'],
output_names=['output', 'hn', 'cn'],
dynamic_axes={'input': {0: 'sequence'}, 'output': {0: 'sequence'}})
onnx_model = onnx.load('lstm.onnx')
# input shape ['sequence', 3, 10]
print(onnx_model.graph.input[0])
Q: How to export models with loops in it?
Please checkout `Tracing vs Scripting`_.
Q: How to export models with primitive type inputs?
Support for primitive type inputs will be added starting from PyTorch 1.9 release.
However, exporter does not support conversion of models with String inputs.
Q: Does ONNX support implicit scalar datatype casting?
No, but the exporter will try to handle that part. Scalars are converted to constant tensors in ONNX.
The exporter will try to figure out the right datatype for scalars. However for cases that it failed
to do so, you will need to manually provide the datatype information. This often happens with scripted models,
where the datatypes are not recorded. We are trying to improve the datatype
propagation in the exporter such that manual changes are not required in the future. ::
class ImplicitCastType(torch.jit.ScriptModule):
@torch.jit.script_method
def forward(self, x):
# Exporter knows x is float32, will export '2' as float32 as well.
y = x + 2
# Without type propagation, exporter doesn't know the datatype of y.
# Thus '3' is exported as int64 by default.
return y + 3
# The following will export correctly.
# return y + torch.tensor([3], dtype=torch.float32)
x = torch.tensor([1.0], dtype=torch.float32)
torch.onnx.export(ImplicitCastType(), x, 'models/implicit_cast.onnx',
example_outputs=ImplicitCastType()(x))
Q: Is tensor in-place indexed assignment like `data[index] = new_data` supported?
Yes, this is supported for ONNX opset version >= 11. Please checkout `Indexing`_.
Q: Is tensor list exportable to ONNX?
Yes, this is supported now for ONNX opset version >= 11. ONNX introduced the concept of Sequence in opset 11.
Similar to list, Sequence is a data type that contains arbitrary number of Tensors.
Associated operators are also introduced in ONNX, such as SequenceInsert, SequenceAt, etc.
However, in-place list append within loops is not exportable to ONNX. To implement this, please use inplace
add operator.
E.g.: ::
class ListLoopModel(torch.nn.Module):
def forward(self, x):
res = []
res1 = []
arr = x.split(2, 0)
res2 = torch.zeros(3, 4, dtype=torch.long)
for i in range(len(arr)):
res += [arr[i].sum(0, False)]
res1 += [arr[-1 - i].sum(0, False)]
res2 += 1
return torch.stack(res), torch.stack(res1), res2
model = torch.jit.script(ListLoopModel())
inputs = torch.randn(16)
out = model(inputs)
torch.onnx.export(model, (inputs, ), 'loop_and_list.onnx', opset_version=11, example_outputs=out)
# onnxruntime
import onnxruntime
sess = onnxruntime.InferenceSession('loop_and_list.onnx')
out_ort = sess.run(None, {
sess.get_inputs()[0].name: inputs.numpy(),
})
assert [torch.allclose(o, torch.tensor(o_ort)) for o, o_ort in zip(out, out_ort)]
Use external data format
------------------------
``use_external_data_format`` argument in export API enables export of models in ONNX external
data format. With this option enabled, the exporter stores some model parameters in external
binary files, rather than the ONNX file itself. These external binary files are stored in the
same location as the ONNX file. Argument 'f' must be a string specifying the location of the model. ::
model = torchvision.models.mobilenet_v2(pretrained=True)
input = torch.randn(2, 3, 224, 224, requires_grad=True)
torch.onnx.export(model, (input, ), './large_model.onnx', use_external_data_format=True)
This argument enables export of large models to ONNX. Models larger than 2GB cannot be exported
in one file because of the protobuf size limit. Users should set ``use_external_data_format`` to
``True`` to successfully export such models.
Training
--------
``Training`` argument in export API allows users to export models in a training-friendly mode.
``TrainingMode.TRAINING`` exports model in a training-friendly mode that avoids certain model
optimizations which might interfere with model parameter training. ``TrainingMode.PRESERVE``
exports the model in inference mode if ``model.training`` is ``False``. Otherwise, it exports
the model in a training-friendly mode.
The default mode for this argument is ``TrainingMode.EVAL`` which exports the model in
inference mode.
Functions
--------------------------
.. autofunction:: export
.. autofunction:: export_to_pretty_string
.. autofunction:: register_custom_op_symbolic
.. autofunction:: torch.onnx.operators.shape_as_tensor
.. autofunction:: select_model_mode_for_export
.. autofunction:: is_in_onnx_export